Русский
English
Français
Articles
-
Manipulating rod is a new instrument helping energy companies to reduce costs
Nowadays when every company is trying to reach a new level of profitability and minimize the costs, question of increasing efficiency is more than actual.
15 may 2018 -
Comparison of milliohmmeters produced by SKB EP
SKB EP Company sells three types of instruments for measurement of DC electric resistance of windings of transformers, electric motors, electric magnets, cables and of other inductance and inductance-free circuits: the MIKO-7 with basic and updated software, the MIKO-7M, MIKO-8M and the MIKO-9.
1 february 2018 -
Diagnosis of HV circuit breakers state. The PKV/U3, a universal instrument in two modifications
During installation and adjustment of HV circuit breakers, switch gears (KRUE, KRU, KRUN, and KSO) and in the course of their subsequent maintenance their rated characteristics need to be tested, namely, time, speed, travel, current and voltage.
19 january 2018 -
Comparison of milliohmmeters MIKO-7 and MIKO-8 with the new modifications
The SKB EP Company moves forward and continuously updates its products that is evidenced by two new versions of milliohmmeters to be manufactured in 2018: MIKO-7M and MIKO-8M.
21 december 2017 -
Present-Day Market of Instruments for Electric Resistance Measurements
The Company moves forward and continuously updates its products, that is evidenced by three new milliohmmeters to be manufactured in 2018: MIKO-7M, MIKO-8M, and MIKO-9.
19 december 2017 -
Method for the contact resistance measurement by using the MIKO-1 instrument
Four stages of measuring the contact resistances of high-voltage circuit breakers using the MIKO-1 instrument by the example of a column-type circuit breaker.
23 november 2017 -
Monitoring of the SF6 circuit breakers by using the MIKO-1 microohmmeter
The MIKO-1 instrument is designed for measuring the contact resistance, including contacts and contact groups of high-voltage circuit breakers.
23 november 2017 -
A Method for Determining the HV Windings Faults Locations in Power Transformers
One of the methods of finding the fault in the electric circuit is its division into separate sections followed by measurement of electric resistance of each section.
6 july 2017 -
Peculiarities of Checking the State of the RNTA 35/320 OLTC Closing Switch
Parameters of the closing switch change-over oscillogram are among the indicators reflecting the state of high-speed OLTC devices.
30 june 2017 -
First Trip Testing Using the PKV/M7 Analyzer Measurement of Real-Life Time of Circuit Breaker Operation
Depending on the HV circuit breaker type (oil, air, SF6, or vacuum), a list of measured characteristics used for assessing its technical condition can be different.
14 october 2016